Updated November 2026
The petnet smartfeeder 2nd generation white automatic pet feeder medium is designed to dispense scheduled meals while you’re away, but it only works well once it’s paired, mounted on a stable surface, and programmed with portions that match your pet’s needs. This guide walks you through each step, from unboxing to a working feeding schedule, and flags the mistakes that cause most early problems.
Before You Start: Gather What You Need
Setup goes faster when you have everything ready. Manufacturers generally specify that the feeder is intended for dry kibble, so have a bag of your pet’s usual food on hand for testing.
Shopping for one? See our guide: 6 Best Petnet Smartfeeder Automatic Pet Feeders for Cats and Dogs (2026).
- The feeder base, bowl and lid, all wiped clean and dried
- A 2.4 GHz Wi-Fi network and its password (many smart feeders do not connect to 5 GHz networks)
- A smartphone with Bluetooth enabled and the manufacturer’s companion app installed
- A level, flat surface near a power outlet, away from direct sun and moisture
- Your pet’s current daily food amount from the bag or your veterinarian
Step-by-Step Setup and Pairing
Pairing is where most people get stuck, so take it slowly. Confirm the model you own matches the 2nd generation white medium version, since app steps can differ between generations.
- Place the feeder. Set it on a hard, level floor with at least a few inches of clearance around the lid so the mechanism can move freely.
- Power it on. Plug in the adapter and wait for the status indicator to show it is ready for pairing.
- Create your account. Open the app, sign up, and choose to add a new device.
- Connect to Wi-Fi. Enter your 2.4 GHz network details when prompted and keep the phone close to the feeder during this step.
- Confirm the connection. The app should show the feeder as online before you move on.
Programming Portions and Feeding Schedules
Once the feeder is online, set portions and times. Measure each serving with a kitchen scale or the measuring cup that came with your food, because volume measurements vary widely between kibble brands. Your veterinarian can confirm a safe daily amount for your pet’s weight, age and activity level.
Setting Meal Times
Schedule meals at the same times each day, ideally spaced to match your routine. Start with two meals, then adjust if your pet begs early or leaves food behind.
Running a Test Dispense
Before you leave the house, use the manual dispense option in the app and check that the portion lands in the bowl at the expected size. Watch for kibble jamming at the outlet, which often means the food pieces are too large or the bowl is not seated correctly.
Checking Results and Adjusting Over the First Week
For the first several days, observe how quickly your pet eats and whether the bowl is empty before the next meal. Weight changes are the clearest signal that portions need tweaking. A short table can help you track adjustments:
| What You See | Likely Cause | Adjustment |
|---|---|---|
| Bowl empty early, pet hungry | Portion too small | Increase by a small amount and recheck |
| Food left over each meal | Portion too large or pet grazing | Reduce portion or split into more meals |
| Kibble stuck at outlet | Pieces too large or debris | Clean the outlet and try smaller kibble |
Common Mistakes to Avoid
- Using a 5 GHz-only Wi-Fi network, which can block pairing.
- Filling the reservoir with wet or sticky food, which can clog the dispenser.
- Skipping the test dispense and assuming the schedule is correct.
- Placing the feeder on carpet or an uneven surface, which affects portion accuracy.
- Leaving the reservoir to run low without checking it, especially with multiple pets.
Recommended Gear
A few accessories make daily use easier. A digital kitchen scale helps you weigh portions accurately, which matters more than volume measures for kibble.
- A digital kitchen scale for weighing exact meal portions View on Amazon
- A non-slip feeding mat to keep the base stable and catch stray kibble View on Amazon
FAQ
Does the petnet smartfeeder need Wi-Fi to dispense food?
Scheduled feeding typically continues from the stored schedule even without a connection, but the app features like remote control and alerts depend on Wi-Fi. Check the manufacturer’s manual for the exact offline behavior of your model.
How often should I clean the feeder?
Wipe the bowl and outlet at least once a week, and wash the removable parts before the reservoir is refilled with fresh kibble. Keep electronics dry during cleaning.
Can I use this feeder for wet food?
The feeder is generally intended for dry kibble, and wet food can clog the dispenser and spoil. Confirm the approved food types in the manual before use.
Conclusion
With a stable placement, a 2.4 GHz connection and carefully weighed portions, the petnet smartfeeder 2nd generation white automatic pet feeder medium can keep meals on schedule. Run a test dispense before every trip and watch your pet’s weight over the first few weeks. For feeding amounts tailored to your pet’s health, consult your veterinarian.
Related reading
- PetNet SmartFeeder Automatic Pet Feeder Black: Setup and Feeding Guide
- Smartfeeder Automatic Pet Feeder: Setup, Scheduling and Feeding Tips
- 4 Best Gempet SmartFeeder Automatic Pet Feeder Options for Cats and Dogs (2026)
- Yuposl Mushroom Automatic Pet Feeder: A Step-by-Step Guide for Beginners
- Ymiko Automatic Pet Feeder Manual: Setup, Programming and Fixes
- Working of Automatic Pet Feeder: How It Dispenses Food on Schedule

