Updated November 2026

This guide walks you through the barkshire automatic pet feeder instructions from unboxing to a working meal schedule. You will assemble the feeder, set the clock, program portions and run a test cycle so you know it dispenses correctly before you leave your pet alone with it.

What You Need Before You Start

Gather everything first so setup goes in one pass. Most owners find that a flat, stable surface near an outlet makes the process much easier.

Shopping for one? See our guide: Pit Pet Automatic Feeder Instructions: 8 Best Picks Compared (2026).

  • The feeder base, food bowl or hopper, and lid as packed
  • The power adapter, or batteries if your model accepts them (check the manual for battery type and count)
  • Dry kibble measured in a cup, not wet food
  • A kitchen scale or measuring cup for portioning
  • A small screwdriver if your model has a battery cover or bowl screw

Step-by-Step Assembly and Power-Up

Assemble the feeder before connecting power. Snap or screw the hopper onto the base, then confirm the lid sits flush so food stays dry and the mechanism can turn freely.

  1. Place the base on a level, dry surface away from direct sun and pet water bowls.
  2. Connect the power adapter to the back or underside of the base. If using batteries, install them with the polarity shown inside the battery compartment.
  3. Wait for the display or indicator light to come on. Most models will prompt you to set the clock first.
  4. Set the current time and day. An incorrect clock will shift every scheduled meal.

Programming Meals and Portions

Once the clock is set, program your feeding times. Start with two or three meals a day unless your veterinarian has recommended a different schedule for your pet.

Setting Meal Times

Choose a time, then select the portion size for that slot. Keep meals spaced several hours apart, and avoid scheduling a dispense right before you leave for a long day unless you have tested the feeder first.

Calculating Portion Size

Check the feeding guide on your pet food bag, then divide the daily amount by the number of meals. Feeder portion settings are usually measured in grams or cups per cycle, so convert carefully. Many feeders dispense in fixed increments, so round to the nearest available setting and weigh a test batch to confirm.

Running a Test Cycle

Before relying on the schedule, run a manual test. Use the feeder’s test or manual dispense function, load a measured amount of kibble, and confirm that the correct quantity lands in the bowl. Repeat once more to check consistency. A test takes about five minutes and catches jams, portion errors and lid problems early.

If your model includes a food sensor or low-food alert, confirm it triggers when the hopper runs low. Consult your veterinarian about any change to your pet’s diet or portion size, especially for puppies, kittens, seniors or pets with health conditions.

Common Mistakes

  • Loading wet or sticky food, which can jam the auger or clog the chute.
  • Leaving the clock wrong, so meals run at odd hours.
  • Filling the hopper past the marked fill line, which can cause uneven dispensing.
  • Skipping the test cycle and discovering a jam only after your pet has missed a meal.
  • Mixing battery brands or old and new cells, which can cause unreliable power.

A few accessories make daily use easier and keep the feeder working cleanly.

  • Digital kitchen scale helps you weigh kibble for accurate portions and verify test dispenses. View on Amazon
  • Replacement feeder lid or sealed food storage container keeps kibble fresh between refills. View on Amazon
  • Spare batteries of the type listed in your manual keep meals running during a power cut. View on Amazon

FAQ

Can I use wet food in the barkshire automatic pet feeder?

Most automatic feeders are designed for dry kibble only, since wet food sticks and can jam the dispensing mechanism. Check the manual before using anything other than dry food.

What should I do if the feeder doesn’t dispense?

Unplug the unit, clear any blockage from the chute and auger, and confirm the hopper is not overfilled. Then run the test cycle again and check the manual’s troubleshooting section.

How do I reset the schedule after a power outage?

Many models keep the schedule in memory but reset the clock, so check the time first. If the schedule is lost, reprogram it using your test-cycle portions.

Conclusion

With the barkshire automatic pet feeder instructions followed in order, you should have a feeder that is assembled, timed, portioned and tested. Run a check each week to confirm the schedule and food level, and consult your veterinarian for any changes to your pet’s feeding plan.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our everyday pet gear guides, checking product details against manufacturer specifications and owner feedback.