Updated November 2026

An andrew james automatic pet feeder manual walks you through unboxing, assembly, power setup, clock programming and portion settings. This guide shows you how to find the right manual for your model, what to check before you start, and how to set your first feeding schedule with confidence.

Find the Right Manual for Your Model

Andrew James sells several automatic feeders, and the instructions differ between them, especially in the number of meal slots and the controls. Before you read anything, check the model name printed on the unit or the box. Then look for the manual in the box, or download the PDF from the manufacturer’s website or the product listing. If the printed text does not match your unit, stop and confirm the model first. Following steps from the wrong model is the fastest way to end up with mistimed meals.

Shopping for one? See our guide: 4 Best Automatic Pet Feeder PetSafe Models Compared (2026).

Set Up the Feeder Before Programming It

Most owners skip straight to the clock, but the physical setup matters more. Work through these steps in order:

  1. Unpack the feeder and remove all packing material, including any tape inside the food hopper.
  2. Attach the food bowl and lid, and confirm the lid seats fully so food stays dry.
  3. Place the feeder on a flat, stable surface away from direct sun, heaters and water bowls.
  4. Insert batteries or connect the power adapter, following the polarity or socket type shown in the manual.
  5. Run a test: most manuals describe a manual dispense button. Use it once with a small amount of kibble to confirm the mechanism moves freely.

Program Feeding Times and Portions

Once the feeder is powered, set the clock first, since every feeding time depends on it. Then enter each meal time, using the manual’s button sequence. Pay attention to whether the unit uses 12-hour or 24-hour time, because a mix-up can shift a meal by twelve hours.

For portions, the manual will specify how much each dispense releases. Weigh a sample portion on a kitchen scale and compare it to what you measured with the feeder’s dispense test. Adjust the portion setting until the weight matches your pet’s daily allowance, divided by the number of meals. Your vet can help you set that total for your pet’s size, age and activity level.

Check the Schedule Afterward

Let the feeder run through one full day before you trust it. Watch the first two or three dispenses, then check the bowl. Confirm the times and quantities match what you entered.

Power Backup and Jam Prevention

Power interruptions can reset the clock, so check whether your model keeps its schedule through a power cut. Many manuals note whether battery backup is included and how often batteries need replacing. Keep kibble dry and free of large clumps, since oversized pieces can jam the auger or chute. If the feeder stops mid-cycle, unplug or remove the batteries, clear the obstruction, and restart from the manual’s reset steps.

A few accessories make a feeder easier to live with day to day:

  • Digital kitchen scale: lets you weigh portions accurately when calibrating dispense amounts. View on Amazon
  • Spare AA batteries: a good backup for the clock and motor if your model runs on batteries. View on Amazon
  • Airtight pet food storage container: keeps kibble fresh and easy to refill without spills. View on Amazon

Common Mistakes

  • Skipping the dispense test, which hides mechanical problems until a meal is missed.
  • Setting portions by eye instead of weighing a sample.
  • Using wet or oversized food, which can clog the mechanism.
  • Forgetting to recheck the clock after a power cut.
  • Following another brand’s manual for an Andrew James unit.

For more setup walkthroughs, see Andrew James Automatic Pet Feeder: Setup, Scheduling and 5 Tips (2026) and Andrew James 4 Meal Automatic Pet Feeder: Setup and Feeding Guide.

FAQ

Where can I find an andrew james automatic pet feeder manual?

Check the printed booklet in the box first. If it is missing, look for the PDF on the manufacturer’s website or the product page, matching the exact model name on your unit.

Why does my feeder dispense the wrong amount?

The portion setting may not match your expectation, or the food size may vary. Weigh a few dispenses, adjust the setting as the manual describes, and retest.

Does the feeder keep its schedule during a power cut?

It depends on the model. Check the manual for battery backup details, and reset the clock if the display shows the wrong time after an outage.

Conclusion

Start with the correct manual for your exact model, complete the physical setup, and run a dispense test before you program anything. Set the clock, enter meal times, and calibrate portions by weighing them. For portion amounts and any feeding concerns, consult your veterinarian.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our everyday pet gear guides, checking product details against manufacturer specifications and owner feedback.